Difference between revisions of "Stereo 3D Requirements"

From apertus wiki
Jump to: navigation, search
m
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
* synchronous sensor trigger (genlock, trigger master-slave)
* external sync for sensor trigger (genlock, trigger master-slave)
* synchronous camera parameters (shutter, whitebalance, etc.)
* external sync for camera parameters (shutter, whitebalance, etc.)
* sensor position finetuning (backfocus, top/bottom & left/right shift in a "few millimeters" area), roll & tilt compensation is not required
* sensor position finetuning (backfocus, top/bottom & left/right shift in a "few millimeters" area), roll & tilt compensation is not required
* SDI output so the signals from both cameras can be converted into something 3d monitors can display with a device like this: http://www.aja.com/en/products/mini-converters/hi5-3d
* SDI output so the signals from both cameras can be converted into something 3d monitors can display with a device like this: http://www.aja.com/en/products/mini-converters/hi5-3d


==Sensor diameter==
==Sensor diameter==
The industry is still split between declaring DOF good or bad as esthetically element for S3D.
The industry is still split between declaring DOF good or bad as esthetically element for S3D.
In general a 2/3" sensor diameter is considered the standard for reduced DOF Stereo 3D recording.
In general a 2/3" sensor diameter is considered the standard for reduced DOF Stereo 3D recording.
----
[[category: Stereo3D]]
[[category: S3D]]
[[category: External Sync]]

Latest revision as of 07:55, 15 November 2017

  • external sync for sensor trigger (genlock, trigger master-slave)
  • external sync for camera parameters (shutter, whitebalance, etc.)
  • sensor position finetuning (backfocus, top/bottom & left/right shift in a "few millimeters" area), roll & tilt compensation is not required
  • SDI output so the signals from both cameras can be converted into something 3d monitors can display with a device like this: http://www.aja.com/en/products/mini-converters/hi5-3d


Sensor diameter

The industry is still split between declaring DOF good or bad as esthetically element for S3D. In general a 2/3" sensor diameter is considered the standard for reduced DOF Stereo 3D recording.