Difference between revisions of "AXIOM Remote"

From apertus wiki
Jump to: navigation, search
(One intermediate revision by the same user not shown)
Line 8: Line 8:
====Status====
====Status====


November 2018
April 2020


* Printed circuit boards for a first version prototype have been designed and populated.
* Printed circuit boards for a first version prototype have been designed and populated.
Line 14: Line 14:
* PCB has been debugged.
* PCB has been debugged.
* Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
* Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
* UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist).
* UI design is ongoing - C firmware prototype is now being ported to C++: https://lab.apertus.org/project/view/18/ (please see this page's footer if you'd like too assist).




Line 36: Line 36:
| style="width: 50%"| [[AXIOM_Remote/Concepts | Original Concepts]]  
| style="width: 50%"| [[AXIOM_Remote/Concepts | Original Concepts]]  
| style="width: 50%"| [https://github.com/apertus-open-source-cinema/AXIOM-Remote GitHub Repository]
| style="width: 50%"| [https://github.com/apertus-open-source-cinema/AXIOM-Remote GitHub Repository]
|-
| style="width: 50%"| [https://lab.apertus.org/project/view/18/ apertus° Lab: AXIOM Remote Task Workboard]
|
|}
|}



Revision as of 07:09, 14 April 2020


This device, and its associated software, is a remote control unit designed to compliment the AXIOM Beta range of cameras. Like the devices it controls, AXIOM Remote is an open source, open hardware project and all data surrounding its research and development has been made freely available.

If you can't find what you're looking for or if we can help you with custom requirements please contact us.


1 Status

April 2020

  • Printed circuit boards for a first version prototype have been designed and populated.
  • Haptic button options are being tested.
  • PCB has been debugged.
  • Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
  • UI design is ongoing - C firmware prototype is now being ported to C++: https://lab.apertus.org/project/view/18/ (please see this page's footer if you'd like too assist).


AXIOM Team Talk 14.3 (Oct 2018) covered AXIOM Remote development progress.

2 Technical

Enclosure Hardware
Graphical User Interface

3 Resources

Original Concepts GitHub Repository
apertus° Lab: AXIOM Remote Task Workboard


ARPCsl02 AXIOM Remote ConceptV4 Slant.jpg

AXIOM Remote Concept 2019 - Note: Design is subject to change as improvements are made.