Difference between revisions of "00-Printed Circuit Boards"
| Line 26: | Line 26: | ||
[[File:00-PB-002- ABDK Power Board V0.30R1.0 Show.jpg | 1150px |]] | [[File:00-PB-002- ABDK Power Board V0.30R1.0 Show.jpg | 1150px |]] | ||
The AXIOM Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software. | The AXIOM Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software. | ||
| Line 37: | Line 39: | ||
[https://wiki.apertus.org/images/3/32/ABCS-SHDMI-02c_AXIOM_Beta_1_x_HDMI_Plugin_Module_V0.7_R1.0_Top_Populated_Show.png Full size image] | [https://wiki.apertus.org/images/3/32/ABCS-SHDMI-02c_AXIOM_Beta_1_x_HDMI_Plugin_Module_V0.7_R1.0_Top_Populated_Show.png Full size image] | ||
This module provides one 1080p60 HDMI output stream via 4 LVDS channels directly from the Zynq on the Microzed. | This module provides one 1080p60 HDMI output stream via 4 LVDS channels directly from the Zynq on the Microzed. | ||
| Line 50: | Line 54: | ||
[https://wiki.apertus.org/images/3/3e/00-SUSB-001-_AXIOM_Beta_1_x_USB_3.0_Plugin_Module_V0.2_R1.0_Top_Populated_Show.png Full size image] | [https://wiki.apertus.org/images/3/3e/00-SUSB-001-_AXIOM_Beta_1_x_USB_3.0_Plugin_Module_V0.2_R1.0_Top_Populated_Show.png Full size image] | ||
| Line 55: | Line 60: | ||
BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/1x_USB_3.0_Plugin_Module | BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/1x_USB_3.0_Plugin_Module | ||
==00-DS: AXIOM Beta Debug Shields== | |||
[[File:00-DS-001- AXIOM Beta Debug Shield V0.1R1.0 Show sm.jpg | 1150px |]] | |||
[https://wiki.apertus.org/images/a/aa/00-DS-001-_AXIOM_Beta_Debug_Shield_V0.1R1.0_Show.jpg Full size image] | |||
The AXIOM Beta has 2 medium speed IO interfaces to be used with "shields". | |||
BOMs and Schematics of all AXIOM Beta Debug Shields - https://wiki.apertus.org/index.php/Beta_Debug_Shield | |||
Revision as of 22:26, 2 March 2019
1 00-SB: Sensor Boards
The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000.
2 00-MB: Main Boards
The Beta Main Board is the camera's equivalent of a PC's motherboard. It hosts two external medium-speed shield connectors and two high-speed plugin module slot connectors - These act as a central switch for defining where the data that's captured by the sensor and other interfaces gets routed to inside the hardware. In this regard, all specifics can be dynamically reconfigured in software.
BOMs and Schematics of all AXIOM Beta Main Boards - https://wiki.apertus.org/index.php/Beta_Main_Board
3 00-PB: Power Boards
The AXIOM Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.
BOMs and Schematics of all AXIOM Beta Power Boards - https://wiki.apertus.org/index.php/Beta_Power_Board
4 00-SHDMI: HDMI Plugin Modules
This module provides one 1080p60 HDMI output stream via 4 LVDS channels directly from the Zynq on the Microzed.
BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/Beta_HDMI_Plugin_Module
5 00-SUSB: USB 3.0 Plugin Modules
With the USB 3.0 plugin module, any computer with USB 3.0 connectivity can be used as an AXIOM Recorder. This allow for defining format/container/metadata/etc. of uncompressed raw 4k footage.
BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/1x_USB_3.0_Plugin_Module
6 00-DS: AXIOM Beta Debug Shields
The AXIOM Beta has 2 medium speed IO interfaces to be used with "shields".
BOMs and Schematics of all AXIOM Beta Debug Shields - https://wiki.apertus.org/index.php/Beta_Debug_Shield
- 00-SB-002-0V16-1R3c
- 00-SB-003-1V2-1R2
- 00-SiB-001-0V12-1R0
- 00-DS-001-0V1-1R0
- 00-CSO-001-
- 00-SPMOD-001-0V1-1R0
- 00-SPMOD-002-0V1-1R1
- 00-TPMOD-001-1V2-1R0
- 00-TPMOD-002-1V2-1R1
- 00-PMODD-001-1V0