Difference between revisions of "AXIOM Beta/Camera Structure"

From apertus wiki
Jump to: navigation, search
m
 
(160 intermediate revisions by 4 users not shown)
Line 4: Line 4:




----
'''Note:''' All layouts/dimensions have been laid-out in accordance with the specific requirements of this application. Reconfiguration is possible and encouraged. For guidance, contribution or commissions please [https://www.apertus.org/contact contact] us.
 
 
 
[[File:ABDK 2xHDMI.jpg | 1150px |]]
 
 
 
==Camera Versions==
 
Distinctions between AXIOM Beta's Developer Kit, Compact and Extended versions are purely denoted by variations in the camera's enclosure (or lack thereof). Aside from custom orders, e.g. where specific PCBs or modules aren't necessarily required, all internal PCB's and components are exactly the same.
 
 
'''Note:''' If a custom version of AXIOM Beta Developer Kit is required for scientific/research purposes, then it could be possible to make the necessary changes. Please make [https://www.apertus.org/contact contact] to discuss requirements.
 
 
===AXIOM Beta Developer Kit===


A skeleton frame provides support for the electronics, lens mount (e-mount) and tripod footplate. No surrounding enclosure allows for easy access to the AXIOM Beta's core components and their connectors.


==AXIOM Beta PCB Stack Layout==
Intended for developers and early adopters - currently shipping. See [https://wiki.apertus.org/index.php/AXIOM_Beta/Prices Prices].


Version 4:
'''Implications:'''


<center>
* Skeleton enclosure only ([https://github.com/apertus-open-source-cinema/beta-hardware/blob/master/Enclosure/Skeleton_E-mount/Skeleton-Emount.stl 3D View]).
[[File:PCB-Stack-Concept-V03-022.jpg | 700px]]
* CMV12000 image sensor.
</center>
* Camera control via connected PC and Linux Terminal/Console only.
* Passive sensor cooling (works well).
* Passive E-Mount (passive Canon / Nikon adapter available).
* Screw-on UV/IR cut off filter instead of camera internal one.
* Interface Board limits image sensors throughput to 150FPS@4K (faster Interface Board replacement will be available later).
* Dual 5V 3+A AC power supply (included).
* 1x HDMI 1080p60 output module and PMOD debug module are the only plugin modules available currently (AXIOM Beta has two slots).
* Solder-on area on AXIOM Main Board not populated with gyroscopes/magnetometer/accelerator yet (will be available later on).
* Power Board requires manual reconfiguration (trimmers) when switching to a different image sensor module (potentially in the future).
* No power-on switch on camera yet (camera turns on when power is connected).
* Cameras need to be user calibrated -> [[Factory Calibration]].
* [https://wiki.apertus.org/index.php/AXIOM_Beta/Manual#Firmware Software/Firmware] is a work in progress.


'''Note:''' All dimensions are not final. Work in progress...
===AXIOM Beta Compact (AB CP)===


[[File:PCB_Stack_Concept_V03_02.pdf]]
This enclosure option provides a solid but lightweight aluminum layer around the camera's electronics and incorporates several mount points and future expansion slots. Great for rig integration or general in-the-field protection. More camera control and recording options are meant to be ready together with the AXIOM Beta compact.  


Onshape CAD workfile [https://cad.onshape.com/documents/58833d76000df10fe2249f8a/w/1e208f70f250bcc59aa74d03/e/51df8678a0ad64b69c121f5f here]


'''Note:''' This enclosure version is currently in development.


----
===AXIOM Beta Extended (AB EX)===


[[File:Lase Cut Clear 03 sm b.jpg| thumb | 350px | AXIOM Beta I: Developer Kit inside laser-cut acrylic enclosure. Photo credit: Maxime Fuhrer, [https://wiki.apertus.org/index.php/Regional_AXIOM_Communities AXIOM Belgique].]]
With the Extended enclosure the AXIOM Beta shall resemble the golden age of film cameras. With ergonomics in mind and space for an integrated recording device (AXIOM Recorder), this enclosure is intended to be ideal for shoulder mounted operation.
==Skeleton and Enclosure==


'''>>>> TODO''' Overview text required (picture ideally)


Skeleton and Skeleton Footplate: https://github.com/apertus-open-source-cinema/beta-hardware/tree/master/Enclosure/Skeleton_E-mount
'''Note:''' This version of enclosure is in concept phase.


Onshape PCB Stack and Skeleton Assembly: https://cad.onshape.com/documents/58bd498285673a104722aacd/w/466b8105bf6807b3f4f50b6c/e/b33cc7b3cc3cc5eebd5c2ae6
==AXIOM Beta PCB Stack Layout==


For enclosures (development pending) see - [[AXIOM_Beta/Enclosures]]
Version 4:


<center>
[[File:ABTDsl01 AXIOM Beta PCB Stack Layout.png | 1150px]]
</center>


----
Onshape CAD workfile [https://cad.onshape.com/documents/58833d76000df10fe2249f8a/w/1e208f70f250bcc59aa74d03/e/51df8678a0ad64b69c121f5f here]




==Dimensions==
'''Archive:'''


{| class="wikitable" style="width: 100%;background:#fcfcfc;"
V03.02 - [[File:PCB_Stack_Concept_V03_02.pdf]]
|+ style="text-align: left;" |
|-
! scope="col" | !! scope="col" | Height !! scope="col" | Width !! scope="col" | Length !! scope="col" | Weight
|-
! scope=row style="text-align: left;" | AXIOM Beta Skeleton Enclosure
| 65.1mm || 111.76mm || TODO || 47.9g
|-
! scope=row style="text-align: left;" | Enclosure Footplate
| TODO || TODO || TODO || 27.9g
|-
! scope=row style="text-align: left;" | E-mount Lens Tube
| NA || TODO || NA || 28g
|-
! scope="row" style="text-align: left;" | AXIOM Beta I: Developer Kit (w footplate, Lens tube & skeleton enclosure)
| 65.1mm || 111.76mm|| 74mm || 319g
|-
! scope="row" style="text-align: left;" | AXIOM Beta II: Production Ready Enclosure
| TBD || TBD || TBD || TBD
|}


==Enclosures==


----
There are several AXIOM Beta enclosure variants, some are finished and available and some are still in development. The AXIOM Beta Developer Kit (ABDK) has a skeleton framework instead of an enclosure allowing easy access to the electronics but at the same time providing a strong and solid link between hardware, lens mount and tripod mount base. This is great for developers and in lab conditions but there are several other variants that add a 3d printed, laser cut acrylic shell around this skeleton framework. There is also the Compact enclosure as very solid custom CNC milled aluminium multi part assembly.


read more: [[AXIOM Beta/Enclosures]]


==Specifications==
==Specifications==
 
[[File:ABDK Reverse on f2f2f2.png | 1150px |]]


{| class="wikitable" style="width: 100%;background:#fcfcfc;"
{| class="wikitable" style="width: 100%;background:#fcfcfc;"
!colspan=2 | AXIOM Beta Planned Technical Specifications
!colspan=2 | AXIOM Beta Planned Hardware Specifications
|-
| Image Sensor|| CMV12000 (Used for research and development)
|-
| Lens Mount || Passive E-mount
|-
|-
| Image Sensor|| 3 different swappable sensor modules planned
| Hardware Architecture|| Xilinx Zynq 7020 based [http://zedboard.org/product/microzed MicroZed]
|-
|-
| Modules and Shields|| Single HDMI Full HD (4:4:4) output at up to 60 FPS
| Modules and Shields|| Single HDMI Full HD (4:4:4) output at up to 60 FPS
|-
|-
| || Dual 6G SDI output (single input)
| || Dual 6G SDI output (in development)  
|-
|-
| || 3x PMOD debug module  
| || 3x PMOD debug module  
Line 86: Line 102:
| || 4K Displayport/HDMI (in development)  
| || 4K Displayport/HDMI (in development)  
|-
|-
| Features|| 4K RAW experimental HDMI/Displayport outputs over 1080p60
| Connectivity|| USB / USB UART / JTAG / Gigabit Ethernet
|}
 
 
{| class="wikitable" style="width: 100%;background:#fcfcfc;"
!colspan=2 | AXIOM Beta Software Features (some still in development)
|-
|-
| Remote Control|| Change/access all camera functions from smartphone , tablet, laptop (Web GUI, Serial console, SSH) and [[AXIOM Remote]]
| Operating System|| Embedded Linux ([https://www.archlinux.org/ Arch Linux])
|-
| Network Protocols|| SSH/FTP/SCP/etc
|-
| || Graphical User Interfaces via HTTP (in development)
|-
| Capture|| Global shutter Super 35 CMOS Image Sensor
|-
| Output|| Uncompressed 4K raw (still images done, motion picture sequence currently in RGB 1060p60 max.)
|-
| Remote Control|| Change/access all camera functions from smartphone, tablet, laptop (Web GUI (in development), Serial console, SSH) and [[AXIOM Remote]] (in development)
|-
|-
| Power Management|| Voltage, current, temperatures
| Power Management|| Voltage, current, temperatures
|-
|-
| || Wide input voltage range (5-40V - Presently camera only allows 5V)
| || Wide input voltage range (5-40V in development - currently works with 5V supply)
|-
| Motion Tracking|| 3D Accelerometer, 3D magnetometer and 3D gyroscope e.g. for image stabilization (in development)
|-
|-
| Motion Tracking|| 3D Accelerometer, 3D magnetometer and 3D gyroscope e.g. for image stabilization
| Image Processing|| Look-Up-Tables (LUTs)
|-
|-
| Swappable Lens Mounts|| Passive E-mount plus adapters for: Passive Nikon F-Mount; passive Canon EF Mount
| || Matrix color conversion
|-
|-
| Operating System|| Embedded Linux ([https://www.archlinux.org/ Arch Linux])
| || Fixed Pattern Noise (FPN) compensation
|-
| || False color display
|-
| || Overlays
|-
|-
| Hardware Architecture|| Xilinx Zynq 7020 based [http://zedboard.org/product/microzed MicroZed]
| || Dead pixel compensation (in development)
|-
|-
| Image Processing|| Look-Up-Tables (LUTs), matrix color conversion, Fixed Pattern Noise (FPN) compensation, false color display, overlays, dead pixel compensation
| Connectivity|| WiFi / Wireless adapters
|}
|}


'''Note:''' As the AXIOM Beta is currently under heavy development the above table describes goals not the current state of development.
'''Note:''' As the AXIOM Beta is currently under heavy development some elements of the above table describe goals not the current state of development.




----




==Main PCBs in Detail==
[[File:Beta Board Stack.jpg| thumb | 350px | AXIOM Beta electronic board stack.]]
[[File:Beta Board Stack.jpg| thumb | 350px | AXIOM Beta electronic board stack.]]
The AXIOM Beta comprises five core printed circuit boards (PCBs):


==Main PCBs in Detail==
* Sensor Board
* Sensor Interface Board
* AXIOM Beta Main Board
* AXIOM Beta Power Board
* Microzed


The AXIOM Beta comprises five printed circuit boards (PCBs)
Different plugin modules and shields can be used to add interfaces or extend functionality.


In rare cases users may want to build the camera and or its components themselves - see [[AXIOM_Beta/Prices]] for cost estimates. We can either supply all the individual components or the relevant files with a view to a user sourcing unpopulated PCBs directly from the manufacturer. In any event make contact and we'll provide guidance.
In rare cases users may want to build the camera and or its components themselves - see [[AXIOM_Beta/Prices]] for cost estimates. We can either supply all the individual components or the relevant files with a view to a user sourcing unpopulated PCBs directly from the manufacturer. In any event make contact and we'll provide guidance.


'''Note:''' Designing V2 of AXIOM Beta PCBs began in September 2017. Existing camera owners will be sent the updated, improved boards free of charge. The method behind PCB redesign is about extending camera features with more sophisticated chips.




Line 125: Line 166:
!colspan=3| AXIOM Beta PCB's
!colspan=3| AXIOM Beta PCB's
|-
|-
| Sensor Board|| [[File:Temporary_Sensor_Board.jpg|thumb|none|200px|ZIF socket based image sensor interface board.]] || The [[Beta CMV12K ZIF Sensor Board]] hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000. '''Note:''' The ZIF (Zero insertion force) socket is useful for developers as it allows for the sensors removal at the turn of a lever (zero force). The AXIOM Beta II: Production Ready camera hosts the [[Beta CMV12K THT Sensor Board]]. THT (Through hole tech) is suited to applications where the sensor-front-end won't be removed regularly. As such the THT Sensor Board requires that care is taken not to bend the sensor pins on insertion.
| Sensor Board|| [[File:00-SBZ-001-_AXIOM_Beta_CMV12000_ZIF_Sensor_Board_V018R15_w_Sensor_Show_3000.jpg|thumb|none|200px|ZIF socket based image sensor interface board.]] || The [[Beta CMV12K ZIF Sensor Board]] hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000. '''Note:''' The ZIF (Zero insertion force) socket is useful for developers as it allows for the sensors removal at the turn of a lever (zero force). The AXIOM Beta Compact camera hosts the [[Beta CMV12K THT Sensor Board]]. THT (Through hole tech) is suited to applications where the sensor-front-end won't be removed regularly.  
|-
|-
| Interface Board|| [[File:BetaDummyBoard 0.12 TOP.jpg|thumb|none|200px|Interface Board V1 without FPGA for now]] || The [[Beta Interface Dummy Board]] acts as a bridge between the image sensor board and the rest of the camera. It converts communication between the aforementioned components to a standard protocol so that almost any image sensor that becomes available in the future can be used with the AXIOM Beta without changing the rest of the hardware. If AXIOM users felt that 8K was in demand they would simply swap the sensor board for one capable of capturing images in the desired resolution.
| Interface Board|| [[File:00-DIB-001-_AXIOM_Beta_Dummy_Interface_Board_V0.13R1.1_Top_Populated_Show_3000.jpg|thumb|none|200px|Interface Board V1 without FPGA for now]] || The [[Beta Interface Dummy Board]] acts as a bridge between the image sensor board and the rest of the camera. It converts communication between the aforementioned components to a standard protocol so that almost any image sensor that becomes available in the future can be used with the AXIOM Beta without changing the rest of the hardware. If AXIOM users felt that 8K was in demand they would simply swap the sensor board for one capable of capturing images in the desired resolution.
|-
|-
| Beta Main Board|| [[File:Beta_Main_Board.jpg|thumb|none|200px|AXIOM Beta Main Board circa 2016.]] ||The [[Beta Main Board]] is the equivalent of a PC's motherboard. It hosts two external medium-speed shield connectors and two high-speed plugin module slot connectors. These act as a central switch for defining where data captured by the sensor and other interfaces gets routed to inside the hardware. In this regard, all specifics can be dynamically reconfigured in software opening up a lot of new possibilities such as adding shields for audio recording, genlock, timecode, remote control protocols or integrating new codecs and image processing inside the FPGA. In the centre of the main board a 'solder-on' area has been incorporated, this will for example host chips capable of sensing the camera's orientation and acceleration (the same chips used to stabilise quadcopters and track head movements in VR headsets). Being situated directly behind the image sensor centre means that these sensors are ideally positioned to supply data for image stabilisation or metadata about the camera’s orientation and movement during a shot.  
| Beta Main Board|| [[File:00-MB-001- AXIOM Beta Main Board V0.36R1.2 Bottom Populated 02 Show sm b.jpg|thumb|none|200px|AXIOM Beta Main Board circa 2016.]] ||The [[Beta Main Board]] is the equivalent of a PC's motherboard. It hosts two external medium-speed shield connectors and two high-speed plugin module slot connectors. These act as a central switch for defining where data captured by the sensor and other interfaces gets routed to inside the hardware. In this regard, all specifics can be dynamically reconfigured in software opening up a lot of new possibilities such as adding shields for audio recording, genlock, timecode, remote control protocols or integrating new codecs and image processing inside the FPGA. In the centre of the main board a 'solder-on' area has been incorporated, this will for example host chips capable of sensing the camera's orientation and acceleration (the same chips used to stabilise quadcopters and track head movements in VR headsets). Being situated directly behind the image sensor centre means that these sensors are ideally positioned to supply data for image stabilisation or metadata about the camera’s orientation and movement during a shot.  
|-
|-
| Beta Power Board|| [[File:Beta_Power_Board.jpg|thumb|none|200px|AXIOM Beta Power Board V.01.]] ||
| CSO|| [[File:00-CSO-001- AXIOM Beta CSO V0.1R1.0 Show sm.jpg |thumb|none|200px|CSO.]] ||
Finally, the [[Beta Power Board]] PCB, the last board in the stack before the MicroZed™, generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.
The AXIOM [[Beta CSO]] (Center Solder On) is a small addon PCB that can be added to a pre-designated area on the [[Beta Main Board]]. It hosts chips capable of measuring and controlling compensation processes via the camera's software, i.e. for orientation and acceleration (the same chips used to stabilise quadcopters and track movement in VR headsets), magnetic field related data, and three dimensional motion sensing.
|-
| Beta Power Board|| [[File:00-PB-002- ABDK Power Board V0.30R1.0 Show.jpg |thumb|none|200px|AXIOM Beta Power Board V.01.]] ||
The [[Beta Power Board]] PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.
|-
|-
| MicroZed|| [[File:Microzed.jpg|thumb|none|200px|Xilinx MicroZed™.]] ||
| MicroZed|| [[File:Microzed.jpg|thumb|none|200px|Xilinx MicroZed™.]] ||
Line 139: Line 183:




----




==Plugin Modules and Shields==
===Associated Boards===
 
 
{| class="wikitable" style="width: 100%;background:#fcfcfc;"
!colspan=3| Asoociated PCBs
|-
| Power Adapter Board|| [[File:00-PA-001-_AXIOM_Beta_Power_Adapter_Board_V0.2R1.1_Show.png|thumb|none|200px| AXIOM Beta Power Adapter Board.]] ||The [[Beta Power Adapter Board]] connects the camera to a DC power supply via pico spox cable.
|-
| Power Button Board|| [[File:Apertus-Loading-please-wait.jpg|thumb|none|200px| AXIOM Beta Compact Power Button Board.]] ||Presently in development - The [[Beta Power Button Board]] is applicable to the AXIOM Beta Compact (ABCP) and is a simple PCB featuring an LED to signify when the camera is active.
|-
|}
 
==Shields and Plugin Modules==
 
 
 
[[File:ABDK Plugin Module Close-Up b.jpg | 1150px | 1xHDMI Module.]]
 
The AXIOM Beta has two high speed module slots with PCIe connectors (these are not really PCIe cards, we just utilize PCIe for the connectors). Each module has a total bandwidth to/from the main processing FPGA of at least 6 Gbit/s. This makes the modules perfect for dealing with high bandwidth video outputs like HDMI/Displayport/SDI.
 
Due to the flexibility that this arrangement provides this could also allow us to create a dedicated solid-state media recorder module in the future. For now the AXIOM Beta relies on external recording though.
 
 
 
 
===Shields===
 
The name shields was inspired by the Arduino plugin boards that are also called "shields". AXIOM Beta sports two shield slots with space for connectors going to both sides of the camera. In contrast to modules the shields in the Beta have slow and medium speed interfaces to the main processing FPGA, and, therefore, are perfect for tasks like: trigger IN/OUT, genlock IN/OUT, timecode IN/OUT, sync IN/OUT or connecting external sensors or buttons, LCDs, etc.


The AXIOM Beta has 2 medium speed IO interfaces to be used in conjunction with "shields".
The AXIOM Beta has 2 medium speed IO interfaces to be used in conjunction with "shields".


* One 200Mbit/s shield interface.
* One 200Mbit/s (west) shield interface.
* One 1Gbit/s shield interface.
* One 1Gbit/s (east) shield interface.


'''Note:''' Shields are not hot plug-able.
'''Note:''' Shields are not hot plug-able.




There are 2 high speed IO interfaces where "plugin modules" can be hot plugged.
[[File:AXIOM-Beta-Developer-Kit-Shields 1.png | 600px]]
 
 
{| class="wikitable" style="width: 100%;background:#fcfcfc;"
!colspan=3| AXIOM Beta Shields
|-
| Debug Shield|| [[File:00-DS-001- AXIOM Beta Debug Shield V0.1R1.0 Show sm.jpg |thumb|none|200px| Debug LEDs and connectors.]] ||The [[Beta Debug Shield]] 2x10 GPIO banks as LED indicators plus two power LEDs. 4 LVDS pairs routed to external connectors JP1/JP2 (plus one GND).
|-
|}
 
===Plugin Modules===
 
There are 2 high speed IO interfaces where "plugin modules" can be hot plugged. They feature:


* 6.2Gbit/s each:
* 6.2Gbit/s each:
Line 159: Line 241:
* Two modules can be combined in one 12.4 Gbit/s double height module.
* Two modules can be combined in one 12.4 Gbit/s double height module.
* Hot pluggable.
* Hot pluggable.
* 2x PCIe connectors (not using PCIe signaling)
 
The plugin modules are PCIe x1 connectors which are not using PCIe signaling.
The bottom Plugin Module is called "south" while the top is called "north".




{| class="wikitable" style="width: 100%;background:#fcfcfc;"
{| class="wikitable" style="width: 100%;background:#fcfcfc;"
!colspan=3| AXIOM Beta Plugin Modules and Shields
!colspan=3| AXIOM Beta Plugin Modules
|-
| HDMI Plugin Module|| [[File:Axiom Beta Plugin Module 1x HDMI v0.4 TOP.jpg|thumb|none|200px|Axiom Beta 1x HDMI Plugin Module V0.4.]] || The [[Beta HDMI Plugin Module]] The 1080p60 4:4:4 output HDMI module is finished, the AXIOM Beta can accommodate up to two of these plugin modules and supply them with independent video streams.
|-
|-
| Power Adapter|| [[File:Power-adapter-02.jpg|thumb|none|200px| AXIOM Beta Power Adapter]] || The [[Beta Power Adapter Board]] ...
| 1x PMOD Plugin Module|| [[File:00-SPMOD-001- AXIOM Beta Single PMOD Plugin Module V0.1R1.0 Show sm.png|thumb|none|200px|1x PMOD Plugin Module (1 slot).]] ||
|-
| Debug Shield|| [[File:Debug-shield-bot01.jpg|thumb|none|200px|...]] ||The [[Beta Debug Shield]] 2x10 GPIO banks as LED indicators plus two power LEDs. 4 LVDS pairs routed to external connectors JP1/JP2 (plus one GND).
|-
| 1x PMOD Plugin Module|| [[File:1xpmodbot.jpg|thumb|none|200px|AXIOM Beta Power Board V.01.]] ||
The [[Beta 1x PMOD Plugin Module]] Single PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.
The [[Beta 1x PMOD Plugin Module]] Single PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.
|-
|-
| 3x PMOD Plugin Module|| [[File:|thumb|none|200px|....]] ||
| 3x PMOD Plugin Module|| [[File:Pmod-debug.png|thumb|none|120px|....]] ||
The [[Beta 3x PMOD Plugin Module]] Triple PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.
The [[Beta 3x PMOD Plugin Module]] Triple PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.
|-
|-
Line 180: Line 258:
The [[PMOD LED Matrix Debug Module]] ...
The [[PMOD LED Matrix Debug Module]] ...
|-
|-
| 4K HDMI Plugin Module|| [[File:...|thumb|none|200px|...]] ||
| HDMI Plugin Module|| [[File:ABCS-SHDMI-02c AXIOM Beta 1 x HDMI Plugin Module V0.7 R1.0 Top Populated Show sm.jpg |thumb|none|200px|Axiom Beta 1x HDMI Plugin Module V0.4.]] || The [[Beta HDMI Plugin Module]] The 1080p60 4:4:4 output HDMI module is finished, the AXIOM Beta can accommodate up to two of these plugin modules and supply them with independent video streams.
|-
| 1x USB 3.0 Plugin Module (1x slot)|| [[File:00-SUSB-001- AXIOM Beta 1 x USB 3.0 Plugin Module V0.2 R1.0 Top Populated Show sm.jpg|thumb|none|200px| USB 3.0 Plugin Module]] || [[1x USB 3.0 Plugin Module]] to allow storing of 4K uncompressed video to a connected PC. Offers 3.2 Gbit/s throughput which corresponds to 400MByte/s, enough to record uncompressed 4096x2160 raw 12 bit video at 25 FPS to a connected computer.
|-
| Dual Riser Plugin Module|| [[File:ABDR-001-01a-_AXIOM_Beta_Dual_Riser_V0.1R1.0_Top_3200x2000.jpg|thumb|none|200px|Dual Plugin Module Riser]] ||
The [[Dual Plugin Module Riser]] adds a 90° turn to the plugin module slots allowing them to be placed inwards on the AXIOM Beta.
|-
| 4K HDMI Plugin Module|| [[File:Apertus-Loading-please-wait.jpg|thumb|none|200px|...]] ||
The [[4K HDMI Plugin Module]] Allows recording 4K/UHD video on an external recorder with a standard 2160p signal. Will also work to supply 4K/UHD screens with a signal of course.
The [[4K HDMI Plugin Module]] Allows recording 4K/UHD video on an external recorder with a standard 2160p signal. Will also work to supply 4K/UHD screens with a signal of course.
|-
|-
| SDI Plugin Module (1x slot)|| [[File:...|thumb|none|200px|...]] ||
| SDI Plugin Module || [[File:00-DSDI-001- AXIOM-Photon-SDI R1.0 Top Populated Show sm.jpg|thumb|none|200px|...]] ||
The [[SDI Plugin Module]] An industry standard serial digital interface (SDI) connection plugin module will provide a nominal data transfer rate of 3G/6G.
The [[SDI Plugin Module]] An industry standard serial digital interface (SDI) connection plugin module will provide a nominal data transfer rate of 3G/6G.
|-
| Dual SATA Plugin Module || [[File:00-DSAT-001- AXIOM Beta Dual SATA Plugin Module V0.6 R1.0 Top Populated Show sm.jpg|thumb|none|200px|...]] ||
The [[Dual SATA Plugin Module]] lays the foundation for the development required for writing video footage to solid state drives directly from the AXIOM Beta in the future.
|}
|}


'''Note:''' If no image or page exists in the above listings it's because the respective PCB is in development.
'''Note:''' If no image or page exists in the above listings it's because the respective PCB is in development.
===Plugin Module Pinout===




----
{| class="wikitable" style="width: 100%;
! Pin Name
! Function
! Pin Name
! Function
|-
| A1
| style="background-color:#000000; color:#ffffff;" | GND
| B1
| style="background-color:#ffc702;" | I²C SDA
|-
| A2
| style="background-color:#34cdf9; color:#000000;" | LVDS0 +
| B2
| style="background-color:#ffc702;" | I²C SCL
|-
| A3
| style="background-color:#34cdf9; color:#000000;" | LVDS0 -
| B3
| style="background-color:#fd6864;" | VCC I²C (typically 3v3)
|-
| A4
| style="background-color:#000000; color:#ffffff;" | GND
| B4
| style="background-color:#9aff99;" | IO 0 (typically 3v3)
|-
| A5
| style="background-color:#34cdf9; color:#000000;" | LVDS1 +
| B5
| style="background-color:#9aff99;" | IO 1 (typically 3v3)
|-
| A6
| style="background-color:#34cdf9; color:#000000;" | LVDS1 -
| B6
| style="background-color:#9aff99;" | IO 2 (typically 3v3)
|-
| A7
| style="background-color:#000000; color:#ffffff;" | GND
| B7
| style="background-color:#9aff99;" | IO 3 (typically 3v3)
|-
| A8
| style="background-color:#34cdf9; color:#000000;" | LVDS2 +
| B8
| style="background-color:#9aff99;" | IO 4 (typically 3v3)
|-
| A9
| style="background-color:#34cdf9; color:#000000;" | LVDS2 -
| B9
| style="background-color:#9aff99;" | IO 5 (typically 3v3)
|-
| A10
| style="background-color:#000000; color:#ffffff;" | GND
| B10
| style="background-color:#9aff99;" | IO 6 (typically 3v3)
|-
| A11
| Power Good; NC
| B11
| style="background-color:#9aff99;" | IO 7 (typically 3v3)
|-
| A12
| style="background-color:#000000; color:#ffffff;" | GND
| B12
| style="background-color:#fd6864;" | 5V
|-
| A13
| style="background-color:#34cdf9; color:#000000;" | LVDS3 +
| B13
| style="background-color:#fd6864;" | VCC (typically 3v3)
|-
| A14
| style="background-color:#34cdf9; color:#000000;" | LVDS3 -
| B14
| style="background-color:#fd6864;" | VCCIO LVDS (typically 2v4)
|-
| A15
| style="background-color:#000000; color:#ffffff;" | GND
| B15
| style="background-color:#000000; color:#ffffff;" | GND
|-
| A16
| style="background-color:#34cdf9; color:#000000;" | LVDS4 +
| B16
| style="background-color:#34cdf9;" | LVDS5 +
|-
| A17
| style="background-color:#34cdf9; color:#000000;" | LVDS4 -
| B17
| style="background-color:#34cdf9;" | LVDS5 -
|-
| A18
| style="background-color:#000000; color:#ffffff;" | GND
| B18
| style="background-color:#000000; color:#ffffff;" | GND
|}
 
---
 
[[File:Pcie_conn.png|right|1150px]]


---


==Functions==
==Functions==


'''Recording Options'''
'''Recording Options'''
 
[[File:Beta_Assembly.jpg| thumb | 350px | AXIOM Beta Developer Kit.]]
The AXIOM Beta currently utilizes external third-party recorders for capturing moving images. A number of different products from different brands can record the HDMI signal from the AXIOM Beta and store the video in Prores or DNxHD. There are plans for enabling AXIOM Beta internal recording to solid state storage in the future however. In particular this is a requirement for writing high speed video as the Beta sensor is capable of capturing moving images at up to 300 FPS in full 4K resolution.
The AXIOM Beta currently utilizes external third-party recorders for capturing moving images. A number of different products from different brands can record the HDMI signal from the AXIOM Beta and store the video in Prores or DNxHD. There are plans for enabling AXIOM Beta internal recording to solid state storage in the future however. In particular this is a requirement for writing high speed video as the Beta sensor is capable of capturing moving images at up to 300 FPS in full 4K resolution.


Line 205: Line 395:




[[File:Beta_Assembly.jpg| thumb | 350px | AXIOM Beta I: Developer Kit.]]
'''Sound'''
'''Sound'''


AXIOM Beta is not capable of recording sound internally at the moment.
AXIOM Beta is not capable of recording sound internally at the moment.
[[File:ABCP steps W Logo, Tagline and Slogan sm.png | 1150px |]]




----
----
[[How to Contribute]]  - Growing and improving documentation is an ongoing process and you're very welcome to contribute to the project by helping to make these archives better for everyone.




Line 217: Line 411:
[[category: PCBs]]
[[category: PCBs]]
[[category: Overviews]]
[[category: Overviews]]
[[category: plugins]]
[[category: Shields]]
[[category: Beta Main Board]]

Latest revision as of 02:23, 9 April 2020

1 Camera Structure

“The hardware design of the AXIOM Beta was kept simple at first, purely addressing problems discovered with the AXIOM Alpha. In the beginning we had intended to design the camera around a single board on top of an off-the-shelf FPGA/system-on-chip development board: the MicroZed™, but as a result of field testing and together with feedback gathered from the community we agreed to make it far more powerful by devising a more complex stack of boards where each layer is dedicated to specific functions.” - Sebastian Pichelhofer.


Note: All layouts/dimensions have been laid-out in accordance with the specific requirements of this application. Reconfiguration is possible and encouraged. For guidance, contribution or commissions please contact us.


ABDK 2xHDMI.jpg


2 Camera Versions

Distinctions between AXIOM Beta's Developer Kit, Compact and Extended versions are purely denoted by variations in the camera's enclosure (or lack thereof). Aside from custom orders, e.g. where specific PCBs or modules aren't necessarily required, all internal PCB's and components are exactly the same.


Note: If a custom version of AXIOM Beta Developer Kit is required for scientific/research purposes, then it could be possible to make the necessary changes. Please make contact to discuss requirements.


2.1 AXIOM Beta Developer Kit

A skeleton frame provides support for the electronics, lens mount (e-mount) and tripod footplate. No surrounding enclosure allows for easy access to the AXIOM Beta's core components and their connectors.

Intended for developers and early adopters - currently shipping. See Prices.

Implications:

  • Skeleton enclosure only (3D View).
  • CMV12000 image sensor.
  • Camera control via connected PC and Linux Terminal/Console only.
  • Passive sensor cooling (works well).
  • Passive E-Mount (passive Canon / Nikon adapter available).
  • Screw-on UV/IR cut off filter instead of camera internal one.
  • Interface Board limits image sensors throughput to 150FPS@4K (faster Interface Board replacement will be available later).
  • Dual 5V 3+A AC power supply (included).
  • 1x HDMI 1080p60 output module and PMOD debug module are the only plugin modules available currently (AXIOM Beta has two slots).
  • Solder-on area on AXIOM Main Board not populated with gyroscopes/magnetometer/accelerator yet (will be available later on).
  • Power Board requires manual reconfiguration (trimmers) when switching to a different image sensor module (potentially in the future).
  • No power-on switch on camera yet (camera turns on when power is connected).
  • Cameras need to be user calibrated -> Factory Calibration.
  • Software/Firmware is a work in progress.

2.2 AXIOM Beta Compact (AB CP)

This enclosure option provides a solid but lightweight aluminum layer around the camera's electronics and incorporates several mount points and future expansion slots. Great for rig integration or general in-the-field protection. More camera control and recording options are meant to be ready together with the AXIOM Beta compact.


Note: This enclosure version is currently in development.

2.3 AXIOM Beta Extended (AB EX)

With the Extended enclosure the AXIOM Beta shall resemble the golden age of film cameras. With ergonomics in mind and space for an integrated recording device (AXIOM Recorder), this enclosure is intended to be ideal for shoulder mounted operation.


Note: This version of enclosure is in concept phase.

3 AXIOM Beta PCB Stack Layout

Version 4:

ABTDsl01 AXIOM Beta PCB Stack Layout.png

Onshape CAD workfile here


Archive:

V03.02 - File:PCB Stack Concept V03 02.pdf

4 Enclosures

There are several AXIOM Beta enclosure variants, some are finished and available and some are still in development. The AXIOM Beta Developer Kit (ABDK) has a skeleton framework instead of an enclosure allowing easy access to the electronics but at the same time providing a strong and solid link between hardware, lens mount and tripod mount base. This is great for developers and in lab conditions but there are several other variants that add a 3d printed, laser cut acrylic shell around this skeleton framework. There is also the Compact enclosure as very solid custom CNC milled aluminium multi part assembly.

read more: AXIOM Beta/Enclosures

5 Specifications

ABDK Reverse on f2f2f2.png

AXIOM Beta Planned Hardware Specifications
Image Sensor CMV12000 (Used for research and development)
Lens Mount Passive E-mount
Hardware Architecture Xilinx Zynq 7020 based MicroZed
Modules and Shields Single HDMI Full HD (4:4:4) output at up to 60 FPS
Dual 6G SDI output (in development)
3x PMOD debug module
LED matrix debug module
Genlock, Trigger, Timecode, LANC shields (in development)
4K Displayport/HDMI (in development)
Connectivity USB / USB UART / JTAG / Gigabit Ethernet


AXIOM Beta Software Features (some still in development)
Operating System Embedded Linux (Arch Linux)
Network Protocols SSH/FTP/SCP/etc
Graphical User Interfaces via HTTP (in development)
Capture Global shutter Super 35 CMOS Image Sensor
Output Uncompressed 4K raw (still images done, motion picture sequence currently in RGB 1060p60 max.)
Remote Control Change/access all camera functions from smartphone, tablet, laptop (Web GUI (in development), Serial console, SSH) and AXIOM Remote (in development)
Power Management Voltage, current, temperatures
Wide input voltage range (5-40V in development - currently works with 5V supply)
Motion Tracking 3D Accelerometer, 3D magnetometer and 3D gyroscope e.g. for image stabilization (in development)
Image Processing Look-Up-Tables (LUTs)
Matrix color conversion
Fixed Pattern Noise (FPN) compensation
False color display
Overlays
Dead pixel compensation (in development)
Connectivity WiFi / Wireless adapters

Note: As the AXIOM Beta is currently under heavy development some elements of the above table describe goals not the current state of development.



6 Main PCBs in Detail

AXIOM Beta electronic board stack.

The AXIOM Beta comprises five core printed circuit boards (PCBs):

  • Sensor Board
  • Sensor Interface Board
  • AXIOM Beta Main Board
  • AXIOM Beta Power Board
  • Microzed

Different plugin modules and shields can be used to add interfaces or extend functionality.

In rare cases users may want to build the camera and or its components themselves - see AXIOM_Beta/Prices for cost estimates. We can either supply all the individual components or the relevant files with a view to a user sourcing unpopulated PCBs directly from the manufacturer. In any event make contact and we'll provide guidance.


AXIOM Beta PCB's
Sensor Board
ZIF socket based image sensor interface board.
The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000. Note: The ZIF (Zero insertion force) socket is useful for developers as it allows for the sensors removal at the turn of a lever (zero force). The AXIOM Beta Compact camera hosts the Beta CMV12K THT Sensor Board. THT (Through hole tech) is suited to applications where the sensor-front-end won't be removed regularly.
Interface Board
Interface Board V1 without FPGA for now
The Beta Interface Dummy Board acts as a bridge between the image sensor board and the rest of the camera. It converts communication between the aforementioned components to a standard protocol so that almost any image sensor that becomes available in the future can be used with the AXIOM Beta without changing the rest of the hardware. If AXIOM users felt that 8K was in demand they would simply swap the sensor board for one capable of capturing images in the desired resolution.
Beta Main Board
AXIOM Beta Main Board circa 2016.
The Beta Main Board is the equivalent of a PC's motherboard. It hosts two external medium-speed shield connectors and two high-speed plugin module slot connectors. These act as a central switch for defining where data captured by the sensor and other interfaces gets routed to inside the hardware. In this regard, all specifics can be dynamically reconfigured in software opening up a lot of new possibilities such as adding shields for audio recording, genlock, timecode, remote control protocols or integrating new codecs and image processing inside the FPGA. In the centre of the main board a 'solder-on' area has been incorporated, this will for example host chips capable of sensing the camera's orientation and acceleration (the same chips used to stabilise quadcopters and track head movements in VR headsets). Being situated directly behind the image sensor centre means that these sensors are ideally positioned to supply data for image stabilisation or metadata about the camera’s orientation and movement during a shot.
CSO
CSO.

The AXIOM Beta CSO (Center Solder On) is a small addon PCB that can be added to a pre-designated area on the Beta Main Board. It hosts chips capable of measuring and controlling compensation processes via the camera's software, i.e. for orientation and acceleration (the same chips used to stabilise quadcopters and track movement in VR headsets), magnetic field related data, and three dimensional motion sensing.

Beta Power Board
AXIOM Beta Power Board V.01.

The Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.

MicroZed
Xilinx MicroZed™.

The AES-Z7MB-7Z020-SOM-G MicroZed™ is a development board based on the Xilinx Zynq®-7000 All Programmable SoC (System-on-a-Chip). It can be used as both a stand-alone development board for SoC experimentation or in a product like the AXIOM Beta.



6.1 Associated Boards

Asoociated PCBs
Power Adapter Board
AXIOM Beta Power Adapter Board.
The Beta Power Adapter Board connects the camera to a DC power supply via pico spox cable.
Power Button Board
AXIOM Beta Compact Power Button Board.
Presently in development - The Beta Power Button Board is applicable to the AXIOM Beta Compact (ABCP) and is a simple PCB featuring an LED to signify when the camera is active.

7 Shields and Plugin Modules

1xHDMI Module.

The AXIOM Beta has two high speed module slots with PCIe connectors (these are not really PCIe cards, we just utilize PCIe for the connectors). Each module has a total bandwidth to/from the main processing FPGA of at least 6 Gbit/s. This makes the modules perfect for dealing with high bandwidth video outputs like HDMI/Displayport/SDI.

Due to the flexibility that this arrangement provides this could also allow us to create a dedicated solid-state media recorder module in the future. For now the AXIOM Beta relies on external recording though.



7.1 Shields

The name shields was inspired by the Arduino plugin boards that are also called "shields". AXIOM Beta sports two shield slots with space for connectors going to both sides of the camera. In contrast to modules the shields in the Beta have slow and medium speed interfaces to the main processing FPGA, and, therefore, are perfect for tasks like: trigger IN/OUT, genlock IN/OUT, timecode IN/OUT, sync IN/OUT or connecting external sensors or buttons, LCDs, etc.

The AXIOM Beta has 2 medium speed IO interfaces to be used in conjunction with "shields".

  • One 200Mbit/s (west) shield interface.
  • One 1Gbit/s (east) shield interface.

Note: Shields are not hot plug-able.


AXIOM-Beta-Developer-Kit-Shields 1.png


AXIOM Beta Shields
Debug Shield
Debug LEDs and connectors.
The Beta Debug Shield 2x10 GPIO banks as LED indicators plus two power LEDs. 4 LVDS pairs routed to external connectors JP1/JP2 (plus one GND).

7.2 Plugin Modules

There are 2 high speed IO interfaces where "plugin modules" can be hot plugged. They feature:

  • 6.2Gbit/s each:
    • 6 ✕ 950Mbit/s
    • 500MBit/s GPIO
  • Two modules can be combined in one 12.4 Gbit/s double height module.
  • Hot pluggable.

The plugin modules are PCIe x1 connectors which are not using PCIe signaling. The bottom Plugin Module is called "south" while the top is called "north".


AXIOM Beta Plugin Modules
1x PMOD Plugin Module
1x PMOD Plugin Module (1 slot).

The Beta 1x PMOD Plugin Module Single PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.

3x PMOD Plugin Module
....

The Beta 3x PMOD Plugin Module Triple PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when General Purpose Input/Output (GPIO) is required.

PMOD LED Matrix Debug Module
PMOD LED Matrix Debug Module.

The PMOD LED Matrix Debug Module ...

HDMI Plugin Module
Axiom Beta 1x HDMI Plugin Module V0.4.
The Beta HDMI Plugin Module The 1080p60 4:4:4 output HDMI module is finished, the AXIOM Beta can accommodate up to two of these plugin modules and supply them with independent video streams.
1x USB 3.0 Plugin Module (1x slot)
USB 3.0 Plugin Module
1x USB 3.0 Plugin Module to allow storing of 4K uncompressed video to a connected PC. Offers 3.2 Gbit/s throughput which corresponds to 400MByte/s, enough to record uncompressed 4096x2160 raw 12 bit video at 25 FPS to a connected computer.
Dual Riser Plugin Module
Dual Plugin Module Riser

The Dual Plugin Module Riser adds a 90° turn to the plugin module slots allowing them to be placed inwards on the AXIOM Beta.

4K HDMI Plugin Module
...

The 4K HDMI Plugin Module Allows recording 4K/UHD video on an external recorder with a standard 2160p signal. Will also work to supply 4K/UHD screens with a signal of course.

SDI Plugin Module
...

The SDI Plugin Module An industry standard serial digital interface (SDI) connection plugin module will provide a nominal data transfer rate of 3G/6G.

Dual SATA Plugin Module
...

The Dual SATA Plugin Module lays the foundation for the development required for writing video footage to solid state drives directly from the AXIOM Beta in the future.

Note: If no image or page exists in the above listings it's because the respective PCB is in development.

7.3 Plugin Module Pinout

Pin Name Function Pin Name Function
A1 GND B1 I²C SDA
A2 LVDS0 + B2 I²C SCL
A3 LVDS0 - B3 VCC I²C (typically 3v3)
A4 GND B4 IO 0 (typically 3v3)
A5 LVDS1 + B5 IO 1 (typically 3v3)
A6 LVDS1 - B6 IO 2 (typically 3v3)
A7 GND B7 IO 3 (typically 3v3)
A8 LVDS2 + B8 IO 4 (typically 3v3)
A9 LVDS2 - B9 IO 5 (typically 3v3)
A10 GND B10 IO 6 (typically 3v3)
A11 Power Good; NC B11 IO 7 (typically 3v3)
A12 GND B12 5V
A13 LVDS3 + B13 VCC (typically 3v3)
A14 LVDS3 - B14 VCCIO LVDS (typically 2v4)
A15 GND B15 GND
A16 LVDS4 + B16 LVDS5 +
A17 LVDS4 - B17 LVDS5 -
A18 GND B18 GND

---

Pcie conn.png

---

8 Functions

Recording Options

AXIOM Beta Developer Kit.

The AXIOM Beta currently utilizes external third-party recorders for capturing moving images. A number of different products from different brands can record the HDMI signal from the AXIOM Beta and store the video in Prores or DNxHD. There are plans for enabling AXIOM Beta internal recording to solid state storage in the future however. In particular this is a requirement for writing high speed video as the Beta sensor is capable of capturing moving images at up to 300 FPS in full 4K resolution.


Operating System

Since the camera is running Linux, you have a full operating system at your disposal. This means any 3rd party peripherals like USB drives or wireless adapters should work out of the box. Standard protocols like SSH/FTP/SCP/etc. as well as Graphical User Interfaces via HTTP can be used to interface with the camera from computers and most mobile devices.


Sound

AXIOM Beta is not capable of recording sound internally at the moment.


ABCP steps W Logo, Tagline and Slogan sm.png



How to Contribute - Growing and improving documentation is an ongoing process and you're very welcome to contribute to the project by helping to make these archives better for everyone.