(Status)
Line 5: Line 5:
  
 
* Printed circuit boards for a first version prototype have been designed and populated.
 
* Printed circuit boards for a first version prototype have been designed and populated.
* Button options are being tested.
+
* Haptic button options are being tested.
 
* PCB has been debugged.
 
* PCB has been debugged.
 
* Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
 
* Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
* UI design is ongoing but further software refinements are still required (please see this page's footer if you'd like too assist).
+
* UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist).
  
  

Revision as of 10:32, 3 February 2019

1 Status

November 2018

  • Printed circuit boards for a first version prototype have been designed and populated.
  • Haptic button options are being tested.
  • PCB has been debugged.
  • Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
  • UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist).


AXIOM Team Talk 14.3 (Oct 2018) covered AXIOM Remote development progress.


2 Overviews

3 Technical

4 Resources




2018 July Axiom Remote V3 wm.jpg

AXIOM Remote Concept Rendering 2018 - Note: Design is subject to change as improvements are made.